MFT Fence Alternative

[wo_mack]

I have 3 MFT tables lined up with the long sides connected to one another. I am looking for a fence option that could utilize the bench dogs for 90 degree cuts (also would be great to have measurements and a stop). I will link to an old wood whisper post that is exactly what I am looking for, just not sure where to find it.
https://www.thewoodwhisperer.com/shop-tours/seans-well-equipped-workshop/comment-page-2/

 

[guthrie_m@earthlink.net]

This is what i use and it works great. https://benchdogs.co.uk/collections...ence-dogs-1250mm-fence?variant=22623157256250

 

[wo_mack]

Nice. I see that also have dogs with an attachment to use the festool fence attached to the bench dogs instead of the giant protractor.

 

[KelleyCrafts]

I ordered one of those fences from benchdogs on the 20th of last month. Looks like a great alternative for sure. Still waiting on the fence so I can't give any comments based on experience.

 

[Oldwood]

I use the Veritas Quad track with Qwas raildogs. The shoulder on the raildogs fits the slot well and I just changed the T nut to fit. I put the adhesive rule on the wood which is held on with 1/4" screws in t nuts. This allows you to index the rule to match the cut length.
https://www.leevalley.com/en-ca/shop/hardware/jig-and-fixture-parts/73519-veritas-quad-t-slot-track

 

[wo_mack]

I like that, is there a method of attaching the fence to the bench dogs themselves?

 

[Oldwood]

I like that, is there a method of attaching the fence to the bench dogs themselves?

I use Qwas raildogs, I have the long ones but the short ones would work.
http://qwasdogs.com/RailDogs.html

I swap out the bolt for a t-bolt from Lee Valley but any 1\4 x 20 t- bolt would work.
https://www.leevalley.com/en-ca/sho...re-parts/65638-1-4-20-t-bolts-and-t-slot-nuts

The shoulder on the rail dog locates the track quite accurately.

[attachimg=1]