blakjak220
Member
- Joined
- Feb 9, 2014
- Messages
- 87
So I'm looking to build my own custom MFT using stock MFT tops as either the actual top or a template to make a top....
My question is - There are an couple of options; the top for the MFT 800 ~$80 (# Festool 488565) or the top for the MFT/3 ~$130 (# Festool 495543).
I have read several things about the older tables having a slightly different diameter hole so I wanted to know if I buy one of these new replacement tops are the holes going to be different between the 2? I'd obviously prefer to get the 800 replacement since it's about $50 cheaper but wanted to make sure the hole sizing wasn't going to be off.
Thanks in advance.
My question is - There are an couple of options; the top for the MFT 800 ~$80 (# Festool 488565) or the top for the MFT/3 ~$130 (# Festool 495543).
I have read several things about the older tables having a slightly different diameter hole so I wanted to know if I buy one of these new replacement tops are the holes going to be different between the 2? I'd obviously prefer to get the 800 replacement since it's about $50 cheaper but wanted to make sure the hole sizing wasn't going to be off.
Thanks in advance.