new workbench made with my new Festools

[DAHolloway]

before i bored holes in top[attachimg=1]
after i gored holes
[attachthumb=1]

 

[DAHolloway]

well ok after holes here is before[attachimg=1]

 

[DAHolloway]

here is what i put in one of the drawers
[attachimg=1]

 

[WelshWood]

Clean, simple design, I like it!

How did you bore the holes in the worktop?

~WW

 

[DAHolloway]

I used OF 1400 and 20 mm bit.......It did not take that long and pretty easy to do.....I was quite pleased with the results.........

Duane

 

[willy1959]

Looks great!  can you be a little more specific of how you got the layout correct on the holes? Thanks

 

[DAHolloway]

I have a T square that i marked the centers of of my mft table and then marked out on big table both directions.....worked out pretty good, I am pleased with the table......

Duane

 

[socaljohn]

LR 32 for indexed spacing or mark and plunge freehand?

 

[butzla]

I like the pencil tray/drawer pulls!

 

[DAHolloway]

LR 32 for indexed spacing or mark and plunge freehand?

I did it free hand, i don't have the LR32 yet.....

I like the pencil tray/drawer pulls!

Thanks ...I like them too.....didn't know they were going to be pencil trays when i made them........

 

[richy3333]

LR 32 for indexed spacing or mark and plunge freehand?

I did it free hand, i don't have the LR32 yet.....

I like the pencil tray/drawer pulls!

Thanks ...I like them too.....didn't know they were going to be pencil trays when i made them........

I love the idea too (might have to steal it!). Deny everything and take the credit. Say you thought of it!

 

[Tinker]

I like the hoe pattern you used.  I have often thought of sealing a section of my MFT top off to give me a place to work when disassembling and re assembling anything with very small parts or screws.  With entire top full of holes, i have to reach for a tray or some other way to work so those small items don't find their way to floor or drawers.  With my shaky hands, i find it especially difficult to hang onto tiny screws.  Your design would make it a lot simpler project.
Tinker