OF1400 on guiderail

[Thistleman]

Half term here in the UK next week. I will introducing my nephew to the joys of Festool. To start off with I would like to use an OF1400 on a guiderail with the guiderail adaptor (492601) which I need to purchase. However I seem to remember there is also a 'support foot' for the outboard edge of the router base to prevent it tipping. Try as I might I can not locate the part number or find the thread describing it. Any information gratefully received

 

[Stephen B]

[size=11pt]

It comes with the adaptor. It is mentioned around half way down the description.  [smile]

http://www.festool.com.au/epages/tooltechnic.sf/en_AU/?ObjectPath=/Shops/tooltechnic/Products/488752/SubProducts/492601

 

[Wuffles]

AND, the support foot is ever so handy in other situations too. Didn't realise it didn't come with the router actually.

 

[NYC Tiny Shop]

The support came with mine, not as an accessory.  In a pinch, you could screw in a small wooden block.

 

[Wuffles]

The support came with mine, not as an accessory.  In a pinch, you could screw in a small wooden block.

VERY good idea. Might be more solid in certain situations too.

 

[Bhend18]

You can also use the table widener base plate (493233). It will give you even more support.

 

[Bigchasbroon]

[size=11pt]

It comes with the adaptor. It is mentioned around half way down the description.  [smile]

http://www.festool.com.au/epages/tooltechnic.sf/en_AU/?ObjectPath=/Shops/tooltechnic/Products/488752/SubProducts/492601

So that's what that little bit is for. [tongue] I bought the guide rail adaptor but haven't used it yet and I wasn't sure what that little extra bit was for.