pdc 18 initial lube needed

DanielOB

Member
Joined
Jul 11, 2014
Messages
148
the manual says it : prior to initial use apply grease to the drill spindle and gear-box neck.
drill spindle is, i assume, the Shaft-end protruding outside the drill
What is gear-box neck
 
That's what I think is meant too.

I took the time to download the pdc manual (which apparently goes through ekat nowadays) to see if it's more clear in a different language (sometimes manuals come up  with bogus words by using a literal translation) but it didn't get much clearer.

I also checked the printed manual that came with my old protool pdc, and there only the spindle is mentioned that "should be painted with a thin layer of multi purpose grease" before first use.
 
It wasn't well described in the PDC manual, but I was able to confirm my thoughts with the manual from the QUADRILL DR 18/4 E and PD 20/4 E where it's explicitly mentioned along with a diagram.

[attachimg=1]

In the Festool manuals, the items being described are coloured grey in the diagrams, so the observations above are confirmed as correct with this diagram below;

[attachimg=2]
 

Attachments

  • Screen Shot 05-11-17 at 08.46 PM.PNG
    Screen Shot 05-11-17 at 08.46 PM.PNG
    33.3 KB · Views: 442
  • Screen Shot 05-11-17 at 08.43 PM.PNG
    Screen Shot 05-11-17 at 08.43 PM.PNG
    87.5 KB · Views: 428
Well done, Garry and thanks for checking. I think i ought to read the manuals instead of just putting them away. Cheers to [member=36769]DanielOB[/member]  as well!
 
I asked Lee Valley about this; they contacted Festool, who sent this reply:

Festool has provided the following information in answering your question:

Hello,

Thank you for contacting Festool. The drill spindle comes with multi-purpose grease already applied so there is no need for the end user to apply additional grease to this component. The drill spindle is the connection that receives all the different Festool chucks.

Lee Valley Tools Ltd
 
So, make a visual inspection and confirm that there is a layer of grease. If not, apply a dab. Or just apply a dab to ne sure. Wipe off any excess.
 
Back
Top