Recon tools - the final stretch - 40% off all tools
- Thread starter Bob Marino
- Start date
- Joined
- Jan 22, 2007
- Messages
- 8,426
ScoFF said:
If it was going to someone in the US, I would probably have recommended that you order from a US dealer.
Sparktrician
Member
JoDo said:
You can have both of my exes, but I can't recommend either of them...
[poke] [tongue] [bite tongue]
ScoFF
Member
That's what I mean (US dealer). I (Canadian) called a US dealer today to buy a tool to be shipped to this place in the US where I drive down and pick up. CAN billing address, US hopping address. I was told he couldn't sell to a Canadian no matter where it was vein drop shipped. So I guess even gifts to the US (from a US dealer) bought by us up in the icy North isn't possible? I was told no.
So I called someone else who did. I just don't know if it'll be cancelled tomorrow or I was just lucky or the rep was wrong.
So I called someone else who did. I just don't know if it'll be cancelled tomorrow or I was just lucky or the rep was wrong.
- Joined
- Jan 22, 2007
- Messages
- 8,426
ScoFF said:
Well, technically, that's gaming the system. You said a gift for a friend. You didn't say your friend was you. In that case, you should have ordered from a Canadian dealer and shipped to yourself. You're just hurting your dealers in Canada by not supporting them.
PA floor guy
Member
- Joined
- Nov 25, 2012
- Messages
- 290
Jodo,
Here's the trick, get someone you know to use there CC and address, I do about 50-50. My wife knows about half. I know it's terrible to do, but if she knew what I paid for a kapex, when I already have 5 mitre saws, she would flip. I have a mobile wood shop, so she never enters it, and therefore never knows what I buy. In my case, a guy who works for me, he has an account at my distributor, and when I call, they always say, "well, who's it for today" very comical. It's such an addictive thing. I need one tool yet, and I have every item that is made in the states. And I can't wait till the vecturo comes here. I need one ASAP.
Here's the trick, get someone you know to use there CC and address, I do about 50-50. My wife knows about half. I know it's terrible to do, but if she knew what I paid for a kapex, when I already have 5 mitre saws, she would flip. I have a mobile wood shop, so she never enters it, and therefore never knows what I buy. In my case, a guy who works for me, he has an account at my distributor, and when I call, they always say, "well, who's it for today" very comical. It's such an addictive thing. I need one tool yet, and I have every item that is made in the states. And I can't wait till the vecturo comes here. I need one ASAP.
- Joined
- Jan 22, 2007
- Messages
- 8,426
kelauben said:
Karl, yes, they have a different list. There is separate reconditioned tool inventory at our Canadian repair center.
- Joined
- Jan 22, 2007
- Messages
- 8,426
The grass is always (Festool) greener on the other side...
PA floor guy
Member
- Joined
- Nov 25, 2012
- Messages
- 290
Is there anyway to buy tools after hours, I have always used beaver tools, but they are closed. I keep thinking I wanna switch to uncle BOB. I have talked to him, I love the fact that he actually answers a phone. The owner at beaver tools stopped dealing with people years ago. So bob, are you taking new customers?
- Joined
- Jan 22, 2007
- Messages
- 8,426
ChrisK1970 said:
Chris, all reconditioned tools are shipped complete with all of their original components. So, yes, the angle finder will be there. As for the blade, I believe what I was told that the blade would be inspected to make sure it's in like-new condition. If not, it's replaced. Again, these are 30-day returns, so they have generally seen little use.
promark747
Member
- Joined
- Jan 9, 2010
- Messages
- 501
Anyone looking for a drill set should seriously look at 564247 (T12+3) or 564250 (T15+3). I've purchased three, and just can't pull the trigger on any more, out of principle. ;D For $150 (T12) or $162 (T15) you get the following:
Drill
2 Lithium batteries
Battery charger
Systainer with attic lid
Eccentric chuck
Right angle chuck
3-jaw chuck
Centrotec chuck
Centrotec adapter
Centrotec drill bit
All three of mine have been absolutely pristine, appearing unused (maybe they are from the "safety" stock...not sure how that works). To me, they are a steal at $150 (the chucks alone are worth more than that). Would make a great Christmas gift!
Drill
2 Lithium batteries
Battery charger
Systainer with attic lid
Eccentric chuck
Right angle chuck
3-jaw chuck
Centrotec chuck
Centrotec adapter
Centrotec drill bit
All three of mine have been absolutely pristine, appearing unused (maybe they are from the "safety" stock...not sure how that works). To me, they are a steal at $150 (the chucks alone are worth more than that). Would make a great Christmas gift!
- Joined
- Jan 22, 2007
- Messages
- 8,426
Ok, let me see if I can quickly better explain what I'm calling safety stock.
Imagine a pile of 30-day returned tools sitting in our warehouse. We have a close, somewhat good idea of how many we have of each. Maybe we think we have 20 TS 55s. Well, when you look at our website to see what's available, if we get down to a low quantity, it drops off the list. Because there are times where our cycle counts are off and we might have 19 instead of 20. So, to keep from overselling what we have in stock, I keep a few in the kitty as a backup. Well, today, we did a cycle count on everything that was left to make sure the inventory figures were correct. So, we released those few that we keep as backups for purchase.
Hope that is a better explanation. That's also why almost everything added today is red, meaning very low availability.
Shane
Imagine a pile of 30-day returned tools sitting in our warehouse. We have a close, somewhat good idea of how many we have of each. Maybe we think we have 20 TS 55s. Well, when you look at our website to see what's available, if we get down to a low quantity, it drops off the list. Because there are times where our cycle counts are off and we might have 19 instead of 20. So, to keep from overselling what we have in stock, I keep a few in the kitty as a backup. Well, today, we did a cycle count on everything that was left to make sure the inventory figures were correct. So, we released those few that we keep as backups for purchase.
Hope that is a better explanation. That's also why almost everything added today is red, meaning very low availability.
Shane
[big grin] ;D Thanks. And THANK YOU AMY!!!!