Sysroll enhancements

Joined
Oct 17, 2010
Messages
722
So with all this talk about the sysroll I thought I'd post a few modifications to mine

I was originally putting my guide rail on the backside but found it would slide out so I added a piece of thin steel to the back
As I was looking at the cart I noticed a slot that would fit the rail but had a plastic piece keeping the rail from registering completely in the slot .  Outcomes the orange tool .

Now I have a good way of hauling the rails and my 4 foot level .
Thanks for looking Charlie [attachimg=1][attachimg=2][attachimg=3][attachimg=4][attachimg=5]
 

Attachments

  • image.jpeg
    image.jpeg
    1.8 MB · Views: 1,219
  • image.jpeg
    image.jpeg
    1.8 MB · Views: 1,246
  • image.jpeg
    image.jpeg
    1.5 MB · Views: 1,328
  • image.jpeg
    image.jpeg
    2.8 MB · Views: 1,782
  • image.jpeg
    image.jpeg
    2.4 MB · Views: 1,514
The slot for the rails is well known.  That's what it was designed for.  Instead of using self tapping screws, you could use t-nuts or t-bolts in the t-track that runs down the front and back of both up-rights.
 
Back
Top