Using an ETS EC 150/5 for Car Paint Detailing - Could Use Some Advice Please

[tjbnwi]

They all get a little warm, but it shouldn't really be, what you would call hot.

Now, you are talking about some skill. Then there is shaving the tops off of runs. with a razor blade. That one takes a minute to master too.

That’s what denibbing files are for, I have carbide and razor blade styles in my tool box.

Sucks the most on metallics to remove a run, the metallics bunch at the bottom of the run.

Tom

 

[Steve1]

If you look at orbital polishers they will have an orbit of maybe 16mm, or 20mm, or 25mm.
My sander has an orbit of 3mm --- if I put a soft, thick pad on it, the orbit would be about zero at the workpiece.
So I invested in a real polisher for polishing finish.