Using Hardwood Oak Flooring to Make Panels

[ChuckS]

I wouldn't use 4mms, which are too small.

 

[ChuckS]

@Michael Kellough Typically (and for this first panel), I used 6mm dominos - but if it's really just for alignment, I could use 4 or 5mm, right?

@jeffinsgf - I just came across that stand and printed it the other day. This is the first time using it and I really like it. This version holds the bottle upright and will close the nozzle. Fantastic. It does not re-open it when pulling it out - just closes. Printed in PLA on Bambu P1S.

https://makerworld.com/en/models/943238-titebond-glue-bottle-holder-upside-down#profileId-909321

Thx for the file share. How stable is the setup? I've seen some wooden versions that the bottle and stand can still be knocked down easily.

Wait. There're more stable options: https://makerworld.com/en/models/943238-titebond-glue-bottle-holder-upside-down#profileId-2462690

https://makerworld.com/en/models/943238-titebond-glue-bottle-holder-upside-down#profileId-1051132

This also looks interesting: https://makerworld.com/en/models/12...le-opener-stand?from=search#profileId-1304281

 

[Michael Kellough]

With nice flat nominal 3/4” stock I use 5mm Dominos. If the stock isn’t nicely flat and a little torque will/might make it flatter (requiring less sanding) I’ll use 6mm tenons in the area that needs help.