gunnyr
Member
After many months of drooling I'm almost to by a Vecturo. I have used the Fein Multimaster and a cordless Dewalt model at work. Both of them have left me frustrated. When I ask the owners about blades I mostly hear a version of "I buy whatever is cheapest." I spent 10 minutes this morning riffling through a mishmash of dull blades to trim some plywood. I then spend an uncomfortable 10 minutes on top of some scaffolding trying to trim the plywood clear of some box beams.
To start with I thought I'd order the following blades:
500144 bimetal multi-purpose blade 50mm x 35mm 5-Pack
500143 bimetal multi-purpose blade 78mm x 32mm 5-Pack
500138 scraper blade 1-Pack
I do anything from framing to fine furniture work. I find that I most often use a multitool to flush cut or plunge cut and opening. As I understand the descriptions it seems that he USB blades are best for general use as the HSB Blade description states they are not for plunge cuts. Am I missing something?
To start with I thought I'd order the following blades:
500144 bimetal multi-purpose blade 50mm x 35mm 5-Pack
500143 bimetal multi-purpose blade 78mm x 32mm 5-Pack
500138 scraper blade 1-Pack
I do anything from framing to fine furniture work. I find that I most often use a multitool to flush cut or plunge cut and opening. As I understand the descriptions it seems that he USB blades are best for general use as the HSB Blade description states they are not for plunge cuts. Am I missing something?