What Festool Did You buy Today?
- Thread starter sancho57
- Start date
luvmytoolz
Member
- Joined
- May 17, 2021
- Messages
- 1,800
Yardbird said:
They're definitely not for early morning viewing before you've had a cuppa!
Crazyraceguy
Member
- Joined
- Oct 16, 2015
- Messages
- 4,905
My actual initial exposure to the brand came from Paul Mercel and the guy who runs the YouTube channel called "the poplar shop". Eric something? That was not the channel's original name though. I don't remember what it was?
No one around me uses any of it, except for the RO150 and CT26 for the installers who do Corian seams in the field.
No one around me uses any of it, except for the RO150 and CT26 for the installers who do Corian seams in the field.
To avoid any bs and ad stuff, I never watch any woodworking videos online or live. YouTube is the worst when it comes to ads (at the beginning or in the middle of some watching). With fibre optics, we're talking about seconds. I download everything and watch them, skipping the first minute or two (or even 4 to 5 mins for Festool Live), and fast-forward at will. I can usually finish a 30-min video within 10 minutes or so. One exception: NYW, which I watch from start to end, because of Norm and the professional editing. No bs content or fake enthusiasm there.
luvmytoolz
Member
- Joined
- May 17, 2021
- Messages
- 1,800
ChuckS said:
I do that as well, but the videos from Ishitani Furniture are like movie night for me, snacks, drinks, etc! ;-)
woodferret
Member
- Joined
- Jan 5, 2020
- Messages
- 1,093
I use Festool UK (Carl) as a meditation video.
luvmytoolz
Member
- Joined
- May 17, 2021
- Messages
- 1,800
Mortiser said:
Yeah he does sensational work, really beautiful stuff!
Mortiser said:
Brent and Sedge have 2 different styles. I think both of them work, and that way you appeal to a wider audience. Brent's content is extremely logical and Sedge goes more the emotional way. Either way their content is well rehearsed and scripted. I appreciate both of them, and find some of their tips invaluable. Sedgetool YouTube Channel is a real gem.
Hello there,
who else bought the SYS Org M89 EC-M Nr: 576931 set? I just received mine and noticed a different bit holder than the one Festool used to sell. It has a rougher surface as well as it is missing the typical BH60 IMP imprint. The green rubber ring on it is the same as the one on my 10 years old 10 cm bit.
Maybe they just used the opportunity to empty their storage with this limited offer..
How much did you pay? The price seamed pretty reasonable for the whole set.
I also want to apologize for the potato quality image ^^
who else bought the SYS Org M89 EC-M Nr: 576931 set? I just received mine and noticed a different bit holder than the one Festool used to sell. It has a rougher surface as well as it is missing the typical BH60 IMP imprint. The green rubber ring on it is the same as the one on my 10 years old 10 cm bit.
Maybe they just used the opportunity to empty their storage with this limited offer..
How much did you pay? The price seamed pretty reasonable for the whole set.
I also want to apologize for the potato quality image ^^
Attachments
squall_line
Member
- Joined
- Feb 17, 2021
- Messages
- 2,924
WhoamI said:
I have noticed significant variation in bit holders across multiple sets/tools.
Some of the bit holders cannot be used empty with 1/4" screws/bolts, for instance, because they are deeper and thicker than others.
I'm not sure which, if any, are impact rated, either.
Got the HK-85, used, so in a more compact Systainer than a new one. Already have the fine blade for it too, since Toolstation sold those with like 50% off in a clearance sale.
Now the problem of cutting from both sides with thicker material is gone!
I might look into making a new front door from 54 or 66mm insulated panel.
Now the problem of cutting from both sides with thicker material is gone!
I might look into making a new front door from 54 or 66mm insulated panel.
Crazyraceguy
Member
- Joined
- Oct 16, 2015
- Messages
- 4,905
WhoamI said:
The one I have is 576932. I wonder what the difference is? Metric drill bits, rather than fractional/imperial? anyway it was $239, I think.
The one I have is 576932. I wonder what the difference is? Metric drill bits, rather than fractional/imperial? anyway it was $239, I think.
[/quote]
This could be the difference. I have bought the set for 115€ ($122,73), which is a great deal for drill bits, the 100 mm bits and the Sys-Org (+ the rest).
Sometimes you have to take the deals as they approach you.. These drill bits are the best ones I have used so far, and the 100 mm bits come in handy quite often when screwing in narrow spots (e.g.doing shutters). Since using Centrotec stuff, I never want to live without it again
[/quote]
This could be the difference. I have bought the set for 115€ ($122,73), which is a great deal for drill bits, the 100 mm bits and the Sys-Org (+ the rest).
Sometimes you have to take the deals as they approach you.. These drill bits are the best ones I have used so far, and the 100 mm bits come in handy quite often when screwing in narrow spots (e.g.doing shutters). Since using Centrotec stuff, I never want to live without it again
WhoamI said:This could be the difference. I have bought the set for 115€ ($122,73), which is a great deal for drill bits, the 100 mm bits and the Sys-Org (+ the rest).
Sometimes you have to take the deals as they approach you.. These drill bits are the best ones I have used so far, and the 100 mm bits come in handy quite often when screwing in narrow spots (e.g.doing shutters). Since using Centrotec stuff, I never want to live without it again
What is the quality of the short gray bits? Is it still the absolute trash it was ten years ago?
What is the quality of the short gray bits? Is it still the absolute trash it was ten years ago?
[/quote]
Do you mean the standard size bits or the longer 100 mm bits which can directly be plugged into the Centrotec?
Both are of excellent quality, and I am still using the longer bits which were bought ten years ago.
I had several Bosch and Spax bits but have always been disappointed as they wore off too quick.
The PZ2 bits, which came with my C18 and T18 are still in pretty good shape.
However, I am using the bits as a hobbyist, so they obviously will last longer.
I also have Milwaukee Shockwave bits for my impact driver, which bear a lot of rough usage. They are excellent as well.
[/quote]
Do you mean the standard size bits or the longer 100 mm bits which can directly be plugged into the Centrotec?
Both are of excellent quality, and I am still using the longer bits which were bought ten years ago.
I had several Bosch and Spax bits but have always been disappointed as they wore off too quick.
The PZ2 bits, which came with my C18 and T18 are still in pretty good shape.
However, I am using the bits as a hobbyist, so they obviously will last longer.
I also have Milwaukee Shockwave bits for my impact driver, which bear a lot of rough usage. They are excellent as well.
TSC55K set, which comes with a 1400mm guide rail, 2 batteries and 2 chargers. Added a 3rd battery, x2 guide rails, and the FS-WA Angle Stop with the Guide Extension. This will be used for cabinet work, while I'll be dedicating my MT55 to heavier duty applications, as I run full kerf blades on it.
Really impressed with the TSC55K, very comfortable to use. I was a bit dubious about the Angle Stop, but I had an immediate use for a rail square that could make repeat cuts and seeing as this was the only thing I could find locally, grabbed it. After assembling it, I checked it for square - there's a tiny bit of play in the detents, but once checked and locked down, it kept square for repeated use last night. I took it off the rail and re-installed it a few times to see if that affected it, but no movement. Guide Extension locks to the Angle Stop and remains straight, plus you can calibrate the measurement stop.
Really impressed with the TSC55K, very comfortable to use. I was a bit dubious about the Angle Stop, but I had an immediate use for a rail square that could make repeat cuts and seeing as this was the only thing I could find locally, grabbed it. After assembling it, I checked it for square - there's a tiny bit of play in the detents, but once checked and locked down, it kept square for repeated use last night. I took it off the rail and re-installed it a few times to see if that affected it, but no movement. Guide Extension locks to the Angle Stop and remains straight, plus you can calibrate the measurement stop.
Similar threads
