What is the inside dimensions of a sys-port 1000?

[veric13]

Hello,

I am looking at making an assembly table with sys-az drawers and trying to figure out some measurements.  Does anyone know the inside dimensions of a sys-port 1000?  There is a chart that shows what systainer combinations can go in one in their catalog, so wanted to start there.  Thank you.

 

[Corwin]

The front opening of the Sys-Port 1000 is 430mm wide by 938mm tall. Keep in mind that the Sys-Ports have their own drawers and do not use the Sys-Az drawers, so your dimension may need to be somewhat different -- I don't have any of the Sys-Az drawers, so I cannot be sure about what dimension you will need.

Also, the Systainer 5 doesn't fit in the Sys-Port the same as the other sizes -- it has too much space remaining above the Systainer 5 such that the Systainer is not secure and can be lifted out with the drawer shut and the Sys-Port locked.  [crying]

 

[veric13]

Thank you.  Didn't realize they weren't Sys-AZ drawers.  Good to know.

 

[sandy]

Take a look at the SYS-AZ manual which provides all of the dimensions needed. https://service.festoolusa.com/media/pdf/706994_002_MonAnl_SYS-AZ_Auszug .pdf

Note, also, that it you are using your own drawers/shelves, then, the width will be determined by the width of the drawers you build, plus the widths of the associated slides (which are generally around 1" combined).

Sandy