daft question alert--t15

[speed]

ok daft question

how do you know when the battery is flat on a t15?

i was setting some screws earlier and had the tourqe on number 7 after setting 5 screws to the 6th one stopped half way thru and beeped so i assumed a flat battery so i swapped batts and was doing the same, it turned out that the screw was hitting a hard bit of material and the tourqe was getting shut off.

is it sposed to just die or beep or slow down etc i have a hitachi li-ion and that shuts off and you can press the trigger and nothing happens

 

[jonny round boy]

Speed, you should edit the title of this thread, and put a ? at the end...  [smile] Still a few hours to go for the draw!

 

[Administrator_JSVN]

To answer your question, on the original models of T-series drills (before the recent updates with the battery gauge), you just have to wait for it to die. A beep means the clutch has engaged. To override the clutch, switch to drill mode using the switch on the top of the drill.

 

[speed]

im not too bothered about entering the comp i never win anyway [sad]

the batterys seam to last that long i cant remember when i last charged it [tongue] will wait until it totally shuts down then with no beeping..

 

[mishle]

On My t-15 if I hold the trigger down and it beeps three times it means time for a charge and twice for the clutch setting.

 

[fdengel]

im not too bothered about entering the comp i never win anyway [sad]

And at that rate you never will...

More for the rest of us!

[big grin]