Dimensions of Systainer Cart

[bigarm]

Anyone know the dimensions (length, width, height) of the Systainer cart?  It would be nice to be able to roll around my systainers in my small shop, but the area I have them sitting is quite small.  There is only a little more width than 2 systainers and the height is restricted by clamp storage so it would be nice to see if a couple would fit in.  Thanks.

 

[jamanjeval]

if you just want a wheeled base, there is one that doesn't have the upright handle that the cart has. Plus, you probably don't want the cart for tight places because it only has two swivel casters and two fixed wheels that will make it less maneuverable.

Another option is a simple DIY platform with 4 swivel casters and a small lip to keep the sustainer from falling off. For just moving around, you won't really need to have them locked to the base.

 

[bigarm]

I just want the flat cart not the one with the handle, although a homemade one should work fine now that you mention it.

 

[flair woodworks]

20-1/4" x 14-1/4".

 

[john molloy]

use your systainer to support stuff .if they add to 11 they are same height as mft .make your cart the same height as a systainer and then it will work

 

[rst]

I've made 10 or so  12" X 16" platform bases using scrap 3/4" plywood, cheap swivel wheel bases, gluing and stapling 1 1/4" X 1/4' wood screen lathe on the sides.  I also made a couple 12 x 20 bases for my midis.