I have the Incra table, Mast-R-Lift II and Wonder Fence setup mounted in my table saw, along with their clean sweep system. I hook the clean sweep box up to my normal dust collector, Jet 100VX-CK, with a 4 inch from the bottom and run a 2 1/2 hose, from an adapter, up to the end of the fence. With the clean sweep throat plates on my router there is almost zero dust that isn't extracted. The only time I have any dust left on the table is when I am free handing something without the fence close up, then there will be a little dust sprayed onto the table but that's the only time. The DC on this setup really amazes me and is the best I have ever had with a router table.