MaurizioVacca
Member
- Joined
- Dec 20, 2021
- Messages
- 19
First thing first: hello everyone, first post here on FoG (long time lurker, [big grin])!
I'm in the market for a trimmer and so far I'm mostly considering the MFK 700. Usages will mainly be trimming pre-glued edge banding (either ~1mm veneer edging or PVC) or ABS (depending on project).
I generally apply edge banding on squared edges or edges beveled at 30 to 45 degrees.
Can the MFK do that? What kind of bits do I need? I tried to watch videos and read the manuals but these things are still unclear to me, especially when it comes to working with beveled edges/profiles.
I'm opened to suggestion, tips and ideas. Consider that I already have the OF1010 which I use for pretty much everything that is "router-related". Thank in advance,
Best!
Maurizio
I'm in the market for a trimmer and so far I'm mostly considering the MFK 700. Usages will mainly be trimming pre-glued edge banding (either ~1mm veneer edging or PVC) or ABS (depending on project).
I generally apply edge banding on squared edges or edges beveled at 30 to 45 degrees.
Can the MFK do that? What kind of bits do I need? I tried to watch videos and read the manuals but these things are still unclear to me, especially when it comes to working with beveled edges/profiles.
I'm opened to suggestion, tips and ideas. Consider that I already have the OF1010 which I use for pretty much everything that is "router-related". Thank in advance,
Best!
Maurizio