WarnerConstCo.
Member
- Joined
- Apr 14, 2008
- Messages
- 4,205
chris mann said:
the current wings are pretty nice. They could tweak them a little and be better then the rolling stand.
If Festool offered the ______ (insert favorite NAINA), I would buy one today.
- Thread starter Administrator_JSVN
- Start date
the current wings are pretty nice. They could tweak them a little and be better then the rolling stand.
just learning
Member
- Joined
- Nov 2, 2010
- Messages
- 8
CMS, which would lead to a purchase (same day) of a OF 2200, PS 300, TS75, and MFT for outfeed support.
I'm itching to spend the cash!!
I'm itching to spend the cash!!
Captainwrinkles
Member
- Joined
- Jan 16, 2010
- Messages
- 93
Vac-Sys
Belt Sander
Prolly the cms too but i figure the first 2 would drain funds heavily
Belt Sander
Prolly the cms too but i figure the first 2 would drain funds heavily
GPowers
Member
- Joined
- Mar 1, 2010
- Messages
- 2,326
Richard Leon said:
The pigtail I'am looking would be used on a non-Festool power tool. I would cut off the power cord from the non-Festool device and wire on the Festool plug-it. That way I only need on power cord at my work station. And I could still use the power cord I have velcroed to my CT hose.
You can buy the pigtail in Europe. I found then on the UK e-bay site once, but the price got too high.
Pete Pedisich
Member
- Joined
- Jan 22, 2007
- Messages
- 196
A progressive discount structure, the more Festools you buy the greater your discount. Maybe in 2.5% increments up to 25% off list.
Just kidding.
Carvex
CMS
Just kidding.
Carvex
CMS
PaulMarcel
Member
In order (and marvel at how easy the first one is!):
PIGTAILS!
CMS with all plates available (the stand alone CMS, too, as that's the one I would need with my 1080)
PIGTAILS!
Belt Sander
PIGTAILS!
Vac-SYS
PIGTAILS!
I'm already down for the WCR1000 coming March 1
PIGTAILS!
CMS with all plates available (the stand alone CMS, too, as that's the one I would need with my 1080)
PIGTAILS!
Belt Sander
PIGTAILS!
Vac-SYS
PIGTAILS!
I'm already down for the WCR1000 coming March 1
Brian Buckley
Member
- Joined
- Jan 24, 2007
- Messages
- 6
Vac- syst 2 of them
1. A radio with built in charger.. then I could sell my other drills and combo kits, which leads to #2
2. A combo 18v kit, circ saw, sawzall (is this available in Protool?)
3. CSM? is that just short for a 10" miter saw? Ya I could go for one of those too. [big grin]
2. A combo 18v kit, circ saw, sawzall (is this available in Protool?)
3. CSM? is that just short for a 10" miter saw? Ya I could go for one of those too. [big grin]
Here is the table what people want. It looks like people are happy with current tool offering.
I didn't count non-qualified replies such as UL blames, non existing tools etc. If person asks about the same tool several times it counted as a single vote. Votes for CMS counted as a single vote even if person asked about 3 different inserts, or different version of this tool.
And the hit list is:
Total replies 56 almost 4000 views
Valuable 35 (threads where members asking about tools)
Votes %
CMS 28 80%
VAC-Sys 10 29%
RO-90 10 29%
Belt sander 8 23%
Carvex 8 23%
Centrotec Set 6 17%
WCR-100 5 14%
CS-70,50 or Precisio 3 9%
Shinex 3 9%
WTS-7 2 6%
Planex 2 6%
Protool line 2 6%
C1x drill with LiIon 2 6%
wrench set 1 3%
Zobo cutters 1 3%
RS-200 1 3%
RS-300 1 3%
CSX drill 1 3%
Toolie 1 3%
If you need something don't hesitate and ask. There is a tool(s) in this list that was not imported because of "low demand" in 2001-2004. But Festool tools market is different now.
Please don't vote for RO-90, Carvex and other tools that will be introduced this year.
Regards,
VictorL
I didn't count non-qualified replies such as UL blames, non existing tools etc. If person asks about the same tool several times it counted as a single vote. Votes for CMS counted as a single vote even if person asked about 3 different inserts, or different version of this tool.
And the hit list is:
Total replies 56 almost 4000 views
Valuable 35 (threads where members asking about tools)
Votes %
CMS 28 80%
VAC-Sys 10 29%
RO-90 10 29%
Belt sander 8 23%
Carvex 8 23%
Centrotec Set 6 17%
WCR-100 5 14%
CS-70,50 or Precisio 3 9%
Shinex 3 9%
WTS-7 2 6%
Planex 2 6%
Protool line 2 6%
C1x drill with LiIon 2 6%
wrench set 1 3%
Zobo cutters 1 3%
RS-200 1 3%
RS-300 1 3%
CSX drill 1 3%
Toolie 1 3%
If you need something don't hesitate and ask. There is a tool(s) in this list that was not imported because of "low demand" in 2001-2004. But Festool tools market is different now.
Please don't vote for RO-90, Carvex and other tools that will be introduced this year.
Regards,
VictorL
- Joined
- Jan 22, 2007
- Messages
- 8,426
Victor, thanks so much for taking the time to tabulate the results thus far. I want to take a moment to address each of these, even though it's fairly common knowledge that some are scheduled to appear this year.
CMS All I can say is "we're working on, we've been working on it, it's something we want as badly as any of you", cross your fingers
VAC-Sys UL issues
RO-90 March 1
Belt sander You won't see this any time soon
Carvex June 1
Centrotec Set We're working to get a slightly customized version for the US, it's in the works and we hope to have something soon
WCR-100 March 1
CS-70,50 or Precisio Don't hold your breath.
Shinex March 1
WTS-7 I don't even know what this is, I had to look it up! No plans, basically an RAS with a 7mm stroke.
Planex Working on it, no definitive ETA
Protool line No idea what the long term plans are for Protool in the US, in the short term don't expect to see it
C1x drill with LiIon June 1
wrench set If you're talking about the ratchet set in the mini Systainer, I don't think we'll offer it.
Zobo cutters Currently no plans
RS-200 Currently no plans
RS-300 Currently no plans
CSX drill May 1
Toolie Currently no plans to reintroduce this but I saw some listed in the classifieds here on the forum
I appreciate all of you contributing to this thread and I encourage those who haven't done so to voice their opinions. Thanks!
CMS All I can say is "we're working on, we've been working on it, it's something we want as badly as any of you", cross your fingers
VAC-Sys UL issues
RO-90 March 1
Belt sander You won't see this any time soon
Carvex June 1
Centrotec Set We're working to get a slightly customized version for the US, it's in the works and we hope to have something soon
WCR-100 March 1
CS-70,50 or Precisio Don't hold your breath.
Shinex March 1
WTS-7 I don't even know what this is, I had to look it up! No plans, basically an RAS with a 7mm stroke.
Planex Working on it, no definitive ETA
Protool line No idea what the long term plans are for Protool in the US, in the short term don't expect to see it
C1x drill with LiIon June 1
wrench set If you're talking about the ratchet set in the mini Systainer, I don't think we'll offer it.
Zobo cutters Currently no plans
RS-200 Currently no plans
RS-300 Currently no plans
CSX drill May 1
Toolie Currently no plans to reintroduce this but I saw some listed in the classifieds here on the forum
I appreciate all of you contributing to this thread and I encourage those who haven't done so to voice their opinions. Thanks!
Even though I just dumped a grand on a new router set-up, I would still buy the CMS...then after I stuggled with buyers remorse, which may lead to further depression--or cause other issues to reapear that I once felt I had overcome, I would start looking at the next festool piece that I had to have...
Similar threads
