Length of C18?

[cue003]

I have been having a hard time locating some information on the c18 anywhere on the web. Can you guys help me out please. 

What is the length of the C18 from the back of the drill to the front with no chucks installed?
What is the length including the centrotec chuck
What is the length including the Jacobs chuck

What is the height with the 5.2 battery installed and the overall weight with that battery and centrotec?
What is the height with the 26 battery installed and the overall weight with the battery and centrotec?

Thanks for the assistance.

I was checking out some other manufactures (Matebo, Marfell Etc) and they all seem to discuss the length of the drill for "tight" spaces. 

 

[sae]

Make sure you add the thickness of your hand to that discussion too.

C-handle drills don't excel in tight spaces, which is why right angle attachments are almost a necessity to make that format work.

 

[Darren1972]

Its exactly the same size as the c12

 

[Darren1972]

Heres my own quick review

 

[Holmz]

I have been having a hard time locating some information on the c18 anywhere on the web. Can you guys help me out please. 

What is the length of the C18 from the back of the drill to the front with no chucks installed?
What is the length including the centrotec chuck
What is the length including the Jacobs chuck

What is the height with the 5.2 battery installed and the overall weight with that battery and centrotec?
What is the height with the 26 battery installed and the overall weight with the battery and centrotec?

Thanks for the assistance.

I was checking out some other manufactures (Matebo, Marfell Etc) and they all seem to discuss the length of the drill for "tight" spaces.

I can give you dimension for the A10M, which I like it better with the small battery for general use.
It only matters if you have tight spaces... Which I am seeming to find in order to prove to the Haus-Boss my wisdom. [embarassed]
Regarding toight spaces... The one thing that the A10M does NOT have is an offset chuck, but I am soon trying the Milwaukee offset to see if it fits my drill. The FT offset chuck does not fit my drill (I have tried). I have not needed it, but I suspect I could.

I busted a fingernail off once slamming the finger when the drill decided to wander off the part steel part I was drill vertically down through at ~6' off the ground..
So I can see some wisdom in a sabre handled drill for that sort of work. Is that the C18 or CSX?

 

[cue003]

Heres my own quick review

Thanks for the link to the review.

 

[cue003]

Thank you to everyone who replied.  With the shape of the c18 I didn't even think about having to account for my hand when dealing with clearances etc.  thank you for pointing that out.

If I buy the c18 it will be the complete set with all the pieces and also the lighter smaller battery.

 

[cue003]

I have been having a hard time locating some information on the c18 anywhere on the web. Can you guys help me out please. 

What is the length of the C18 from the back of the drill to the front with no chucks installed?
What is the length including the centrotec chuck
What is the length including the Jacobs chuck

What is the height with the 5.2 battery installed and the overall weight with that battery and centrotec?
What is the height with the 26 battery installed and the overall weight with the battery and centrotec?

Thanks for the assistance.

I was checking out some other manufactures (Matebo, Marfell Etc) and they all seem to discuss the length of the drill for "tight" spaces.

I can give you dimension for the A10M, which I like it better with the small battery for general use.
It only matters if you have tight spaces... Which I am seeming to find in order to prove to the Haus-Boss my wisdom. [embarassed]
Regarding toight spaces... The one thing that the A10M does NOT have is an offset chuck, but I am soon trying the Milwaukee offset to see if it fits my drill. The FT offset chuck does not fit my drill (I have tried). I have not needed it, but I suspect I could.

I busted a fingernail off once slamming the finger when the drill decided to wander off the part steel part I was drill vertically down through at ~6' off the ground..
So I can see some wisdom in a sabre handled drill for that sort of work. Is that the C18 or CSX?

I will be interested in any first hand dimensions etc you can share on the A10M.  If you get an eccentric chuck that fits the Marfell please share that info here.