JCLP Member Joined Oct 27, 2013 Messages 955 May 21, 2017 #1 Thought I would share another use for woodpecker clamping squares. Used 2 of them to hold something vertical as I glue in dominos. Cheers, JC Attachments IMG_0762.JPG 279 KB · Views: 445 IMG_0760.JPG 279.6 KB · Views: 381
Thought I would share another use for woodpecker clamping squares. Used 2 of them to hold something vertical as I glue in dominos. Cheers, JC
semenza Festool Moderator Festool Moderator Joined Jun 24, 2007 Messages 10,363 Location Fingerlakes Region NYS May 21, 2017 #2 Hey, good one! Seth
S Svar Member Joined Jul 22, 2012 Messages 2,650 May 23, 2017 #4 I avoid putting any undue stress on my marking, measuring, or reference tools.
JCLP Member Joined Oct 27, 2013 Messages 955 May 23, 2017 #5 Svar said: I avoid putting any undue stress on my marking, measuring, or reference tools. Click to expand... These are clamping squares and are extremely tough. Been ding this for years and of the eight I have all of them are still 100% square. Cheers, JC
Svar said: I avoid putting any undue stress on my marking, measuring, or reference tools. Click to expand... These are clamping squares and are extremely tough. Been ding this for years and of the eight I have all of them are still 100% square. Cheers, JC
S Svar Member Joined Jul 22, 2012 Messages 2,650 May 23, 2017 #6 JCLP said: Svar said: I avoid putting any undue stress on my marking, measuring, or reference tools. Click to expand... These are clamping squares and are extremely tough. Been ding this for years and of the eight I have all of them are still 100% square. Cheers, JC Click to expand... I see, my bad. I thought they were measuring squares.
JCLP said: Svar said: I avoid putting any undue stress on my marking, measuring, or reference tools. Click to expand... These are clamping squares and are extremely tough. Been ding this for years and of the eight I have all of them are still 100% square. Cheers, JC Click to expand... I see, my bad. I thought they were measuring squares.
R rst Member Joined Nov 10, 2013 Messages 3,292 May 23, 2017 #7 I buy 3" x 3"- 1/4" aluminum from 8020 and use my MFT tables to hold parts vertical for processing.
S suds Member Joined Aug 25, 2008 Messages 415 May 30, 2017 #8 This has been really convenient for mine. Attachments IMG_3612.JPG 2.1 MB · Views: 198
