Pull out Hamper / Basket

[semenza]

Trying to find a particular metal basket pullout hamper. It is white wire basket aprox. 15" tall 18" x 18" square. It is mounted to metal roller type drawer runners ( not ball bearing slides). And can be lifted off the runners. I think the drawer member is attached to the basket. The runners are connected by a couple metal cross pieces and whole unit just screws to the cabinet bottom.

I found a ton of pullout baskets and such with internet searches. But I am after this particular unit. It meets all the parameters I need and I can not find another one that will do the job.

Sorry no picture. I will try to get a pic to add later.

Seth

 

[Packard]

There are several to choose from here.  Not sure if they meet your requirements, but take a look: (You will have to type “hamper” in the search box.  I can’t seem to get you directly to the page.)
https://www.woodworkerexpress.com/search.php?mode=search&page=1

 

[xedos]

sounds like a Rev-a-Shelf offering.

 

[semenza]

It's not Reva Shelf or at least not a current one.  The key to what is different about the one I am looking for is that it does not use ball bearing slides. It uses the drawer runner / slides that have the little "wheels".

Seth

 

[xedos]

It's not Reva Shelf or at least not a current one

The latter part I'm sure of.    I haven't seen partial ext. runners on accessories for at least a decade now, prob. longer.

I'm betting you'll have to cobble together your own kit from various separate parts to get what you want.  Might try ebay and get lucky though.

 

[tjbnwi]

Are these the type of slide you're referring to? If so, I doubt you'll find a supplier made pullout using these anymore.
https://www.knapeandvogt.com/1805?

Tom

 

[Peter Kelly]

Could always do a reverse image search on Tineye to find a retailer if you had a photo of this thing.

 

[semenza]

Are these the type of slide you're referring to? If so, I doubt you'll find a supplier made pullout using these anymore.
https://www.knapeandvogt.com/1805?

Tom

    Yes, that is the type.  Yeah, I was just hoping to find it even though it is out dated / likely discontinued. Other things can be made to work but that older type would be perfect for the customer's situation.

    Probably end up going a similar but different direction.

Seth

 

[guybo]

Hi, I think might be what you are looking for [member=1619]SRSemenza[/member]  https://www.build.com/easy-track-1308/s1084876?uid=2609140&searchId=X1ihHeTkXP

 

[semenza]

Could always do a reverse image search on Tineye to find a retailer if you had a photo of this thing.

  Yeah, that might be worth a try.  [thumbs up]

    I think it is interesting that I have not come up with a single picture of one in searches. Usually even older discontinued things show up in searches because somebody at some point took a picture of it.  [huh]

Seth

 

[semenza]

Hi, I think might be what you are looking for [member=1619]SRSemenza[/member]  https://www.build.com/easy-track-1308/s1084876?uid=2609140&searchId=X1ihHeTkXP

That one is the closest yet. The one I am after has slides on the bottom ( just screws to the cabinet floor with 'L' tabs). It is nearly a cube about 20" W x 18" D  x 14" - 16" T.  Whole basket with slide member attached lifts out / off just like removing that type of drawer.

Seth

 

[Cheese]

Hi, I think might be what you are looking for [member=1619]SRSemenza[/member]  https://www.build.com/easy-track-1308/s1084876?uid=2609140&searchId=X1ihHeTkXP

That's very similar to the Swedish line of Elfa products.

I made a storage box on small wheels that rides in a wooden track. The track itself has 45º shoulders on each side to keep the wheels centered.

[attachimg=1]

[attachimg=2]

Another option if you fabricate your own, is to use the flanged wheels from a dishwasher. When the lower rack is fully loaded with large pots and cast iron pans it's probably loaded to 30-40 pounds.

[attachimg=3]

 

[GoingMyWay]

Elfa does seem to make something similar to what you describe, although it doesn't seem to come in white:https://www.containerstore.com/s/el...mesh-pull_out-drawers/123d?productId=11001778