uses for systainers

[Texastutt]

It's not pretty but it works.

 

[flair woodworks]

[/URL[URL=http://www.postsmile.com/][/URLet/img/28/2818.gif[/IMG][/URL]
]]

Alan,
I did a double-take.  I though the first smiley was pulling out a Systainer!  Gotta get out more...

 

[semenza]

Hi,

I picked this up in Sears. It fits perfectly in a Sys - IV or it could go in a Sys - V with 4" of stuff underneath it.

See here for a couple more pics.  http://www.talkfestool.com/vb/festool-tanos-all-things-systainer/4282-need-tool-tote-your-systainer.html#post64106

Seth

 

[Brice Burrell]

Okay Seth, a bag inside of a box, really?  Now you officially need help with your Systainer problem.... [tongue] [big grin]

 

[Ken Nagrod]

Brice,

Seth has more of a problem than anyone else but me knows about.

Seth,

The extent of your addiction is still under wraps!  [big grin]

 

[semenza]

Okay Seth, a bag inside of a box, really?  Now you officially need help with your Systainer problem.... [tongue] [big grin]

I am also planning to put a Mini Systainer into the tote and a tool roll into the Mini Systainer. If I work at it a bit I think I can reduce the space for tools to almost nill !  [eek]  [smile]

Similar concept to Festools wooden totes.  But much cheaper. 

Seth

 

[semenza]

Brice,

Seth has more of a problem than anyone else but me knows about.

Seth,

The extent of your addiction is still under wraps!  [big grin]

Maaaannn, I neeeed a fix. Somebody send me a piece of ABS plastic  [blink]

 

[Ken Nagrod]

Seth,

Show Brice how you fit your family in sys maxi.  Must make travel so much easier.

 

[semenza]

Seth,

Show Brice how you fit your family in sys maxi.  Must make travel so much easier.

No the Maxi did not work out. I had to go with a Sys - V with forteen extension frames. You can put them in standing up on a roll board.  [big grin]

Seth

 

[Brice Burrell]

Brice,

Seth has more of a problem than anyone else but me knows about.

Seth,

The extent of your addiction is still under wraps!  [big grin]

Maaaannn, I neeeed a fix. Somebody send me a piece of ABS plastic  [blink]

Seth, I've been waiting for you do redo all this stuff for the T-Locs now, you'd better get busy. [tongue]  BTW, thanks for all great ideas. [thumbs up]

 

[fritter63]

I am also planning to put a Mini Systainer into the tote and a tool roll into the Mini Systainer. If I work at it a bit I think I can reduce the space for tools to almost nill !  [eek]   [smile]

Then you'll definitely be interested in my new line of designer systainer carrying bags....

 

[Ken Nagrod]

Some how this is reminding me of that old tv series Mad TV where the cartoon figure would swallow himself up.

 

[GPowers]

Similar concept to Festools wooden totes.  But much cheaper. 

Seth

Thats what I  was thinking.[smile]

 

[MTRANGER]

Brice and\or Willy

Do you think you 125 mm abrasive systainer will be functional on with a t - loc.  There appears to be an indentation on in the front middle to accomadate the t- loc handle. 

 

[Sparktrician]

Okay Seth, a bag inside of a box, really?  Now you officially need help with your Systainer problem.... [tongue] [big grin]

The Cat in the Hat Knows a Lot About That!!! 

[thumbs up]  [poke]  [thumbs up]

 

[Brice Burrell]

Brice and\or Willy

Do you think you 125 mm abrasive systainer will be functional on with a t - loc.  There appears to be an indentation on in the front middle to accomadate the t- loc handle. 

That's a good question, I'll try to see what I can figure out.

 

[Sparktrician]

Brice and\or Willy

Do you think you 125 mm abrasive systainer will be functional on with a t - loc.  There appears to be an indentation on in the front middle to accomadate the t- loc handle. 

Shane,
    It appears that I'd have to make minor adjustments to the partitions to make it work.  No big deal at all.  If you look at the one that I made, the end partitions are somewhat different from those more interior, just because of inside differences in the Systainer.  You can't really see them, now that I think of it.  Also, the center partition's ends are not square, again, due to the Systainer design.  They're cut at a 2-3 degree angle, if I recall right.  In any case, both Brice and I custom-fit our respective inserts to fit the contours of the Systainers.   

[smile]

 

[MTRANGER]

Brice and\or Willy

Do you think you 125 mm abrasive systainer will be functional on with a t - loc.  There appears to be an indentation on in the front middle to accomadate the t- loc handle. 

Shane,
     It appears that I'd have to make minor adjustments to the partitions to make it work.  No big deal at all.  If you look at the one that I made, the end partitions are somewhat different from those more interior, just because of inside differences in the Systainer.  You can't really see them, now that I think of it.  Also, the center partition's ends are not square, again, due to the Systainer design.  They're cut at a 2-3 degree angle, if I recall right.  In any case, both Brice and I custom-fit our respective inserts to fit the contours of the Systainers.   

[smile]

I guess my main concern would be that with the reduced width in the center, would the abrasive discs still fit side by side.  It would be no big deal if it is the same width as the classic, where it narrows for the latches.  I don't have a T-loc(yet) to confirm.

 

[Sparktrician]

Brice and\or Willy

Do you think you 125 mm abrasive systainer will be functional on with a t - loc.  There appears to be an indentation on in the front middle to accomadate the t- loc handle. 

Shane,
     It appears that I'd have to make minor adjustments to the partitions to make it work.  No big deal at all.  If you look at the one that I made, the end partitions are somewhat different from those more interior, just because of inside differences in the Systainer.  You can't really see them, now that I think of it.  Also, the center partition's ends are not square, again, due to the Systainer design.  They're cut at a 2-3 degree angle, if I recall right.  In any case, both Brice and I custom-fit our respective inserts to fit the contours of the Systainers.   

[smile]

I guess my main concern would be that with the reduced width in the center, would the abrasive discs still fit side by side.  It would be no big deal if it is the same width as the classic, where it narrows for the latches.  I don't have a T-loc(yet) to confirm.

Just remember that the abrasive disks are flexible and don't lie flat in any case.  So what if they are stored slightly bent?  When you put them on the sander, they'll straighten out. 

[smile]

 

[Brice Burrell]

I guess my main concern would be that with the reduced width in the center, would the abrasive discs still fit side by side.  It would be no big deal if it is the same width as the classic, where it narrows for the latches.  I don't have a T-loc(yet) to confirm.

My measurements of the T-Loc say it'll work fine.