Using OF 1400 on the track

[Joemac]

I have an OF 1400 router which performs superbly.  I now find the need to rout dadoes for shelving on formica.  My plan is to clamp the opposing sides of the formica under my FS 1400 track and rout the dadoes.  I have never used the track with my router, only with my saw.  Obviously I need some type adapter on the router to connect it to the track.

What is that adapter?

TIA,  Joe

 

[Brice Burrell]

Joe, you need the guide stop.  The metal rods needed to attach the guide to the rail were included with your 1400.

 

[Joemac]

Brice, that is it.  Thanks!!!  I have placed my order for it.

 

[JerrySats]

Hey Joe

The stops work great , don't forget to keep the router bit away from the track some , you don't wanna cut into it .  ;D  I just used mine today to run some dado's in ply .

Regards
Jerry

 

[peter halle]

Hey Joe

The stops work great , don't forget to keep the router bit away from the track some , you don't wanna cut into it .  ;D  I just used mine today to run some dado's in ply .

Regards
Jerry

Wasn't that easy?  Honestly after reading thousands of posts here I think that so many are missing out because they don't do exactly what you did.

Peter

 

[mouppe]

...and for stopped dadoes, use the limit stop on the rail that comes with the TS saws.

http://www.festoolusa.com/power-tool-accessories/track-saws/stops-and-accessories/limit-stop-491582

 

[JerrySats]

...and for stopped dadoes, use the limit stop on the rail that comes with the TS saws.

http://www.festoolusa.com/power-tool-accessories/track-saws/stops-and-accessories/limit-stop-491582

I forgot all about that thing , thanks for reminding me .

 

[sancho57]

dont forget to pick up a set of these

http://www.festoolusa.com/power-tool-accessories/guide-rails/clamps/fs-rapid-clamp-and-fixed-jaws-489790

they will change your life:>D