G Gedhols Member Joined Oct 8, 2018 Messages 4 Oct 8, 2018 #1 I’m building a new workbench and it would be good to have 80/20 around the outside to allow festoon clamps to work...
I’m building a new workbench and it would be good to have 80/20 around the outside to allow festoon clamps to work...
R rvieceli Member Joined Feb 4, 2008 Messages 2,404 Location Carbondale Illinois Oct 8, 2018 #2 [member=68916]Gedhols[/member] It will probably be easier for you to source Bosch Rexroth profiles for your project. https://www.boschrexroth.com/en/au/ click assembly technology from the home page, then aluminum profiles. https://www.boschrexroth.com/irj/po...sDE&display=catalog&bridgeSelectedCatalog=MTN Ron
[member=68916]Gedhols[/member] It will probably be easier for you to source Bosch Rexroth profiles for your project. https://www.boschrexroth.com/en/au/ click assembly technology from the home page, then aluminum profiles. https://www.boschrexroth.com/irj/po...sDE&display=catalog&bridgeSelectedCatalog=MTN Ron
J jasen Member Joined Apr 16, 2016 Messages 59 Oct 8, 2018 #3 Depending where you are located, theres a number of places. The best places typically sell in 6m lengths but will cut as desired. www.profilium.com.au has distributors. Another option is Misumi if you have an ABN. I recently bought off an ebay guyhttps://www.ebay.com.au/str/zshe4454 for 2040 extrusion and was happy with purchase.
Depending where you are located, theres a number of places. The best places typically sell in 6m lengths but will cut as desired. www.profilium.com.au has distributors. Another option is Misumi if you have an ABN. I recently bought off an ebay guyhttps://www.ebay.com.au/str/zshe4454 for 2040 extrusion and was happy with purchase.
G Gedhols Member Joined Oct 8, 2018 Messages 4 Oct 8, 2018 #4 Many thanks Ron and Jason.... will investigate
