Advice Sought: to sand an small area on a painted door without damaging paint...

[member=5277]Alex[/member] idea of the block sounds like what you want then.

Get a photo when you are done.
 
5069ca63dbd0cb308500083b._w.1500_s.fit_.jpg
 
MichaelW2014 said:
... plus the area to be altered is high up on a door...

Personally I would suggest taking the door off the hinges, or the pins out of the hinges.
(But then I don't like to be sanding on a ladder, or a turned over trash can).

A couple of saw horses can hold the door horizontal so that you could then work like a humanoid.??
 
sae said:

this might actually be the best bet, no hassle, no potential for a mistake. just put some tape on the back and stick it on the door. here is a photo of the hooks i am using. i used a matte varnish on the wood.

 

Attachments

  • cast aluminum hooks.JPG
    cast aluminum hooks.JPG
    3.3 MB · Views: 292
Holmz said:
MichaelW2014 said:
... plus the area to be altered is high up on a door...

Personally I would suggest taking the door off the hinges, or the pins out of the hinges.
(But then I don't like to be sanding on a ladder, or a turned over trash can).

A couple of saw horses can hold the door horizontal so that you could then work like a humanoid.??

thanks for the suggestion Holmes, i love humanoids. later holmes
 
Back
Top