paulhtremblay
Member
- Joined
- Jun 4, 2014
- Messages
- 148
Here are the picts from my latest test. (The last picture should actually be the third one down, to reflect the order of my process):
Unfortunately, all 3 tests still resulted in an out of square cut. The results from the picts, 1.2 mm difference over 1200 mm is about what I got for the first 3 tests.
What really makes the matter worse, I did two additional tests using the rail and Qwas dogs. I expected these tests to come out square, but they resulted in out of square cuts as well. The first one was a full 2mm off over about 1800 mm, the second, about .5 mm over 1500 mm.
Unfortunately, all 3 tests still resulted in an out of square cut. The results from the picts, 1.2 mm difference over 1200 mm is about what I got for the first 3 tests.
What really makes the matter worse, I did two additional tests using the rail and Qwas dogs. I expected these tests to come out square, but they resulted in out of square cuts as well. The first one was a full 2mm off over about 1800 mm, the second, about .5 mm over 1500 mm.
Attachments
-
start.jpg225.3 KB · Views: 597
-
rail.jpg261.3 KB · Views: 959
-
align_fence_with_dogs2.jpg246.5 KB · Views: 720
-
prepare_board.jpg147.6 KB · Views: 610
-
board_against_fence.jpg218.4 KB · Views: 600
-
saw_on_track.jpg240.5 KB · Views: 704
-
first_cut.jpg184.1 KB · Views: 620
-
fifth_cut.jpg220.2 KB · Views: 736
-
first_measure.jpg229.2 KB · Views: 589
-
second_measure.jpg212.5 KB · Views: 564
-
align_guide_with_dogs.jpg219.9 KB · Views: 597